www.Grandshelters.com

I once had a similar thing happen with a boss. I told him, "Great minds run in the same gutter", he didn't see the humor in it.


I'm sure we'd all appreciate an opinion after you've used it. Things like, does the blade freeze up with ice, the telescoping handle freeze up and hard to break free. The Dee handle wide enough for a serious mitt or glove. Angle of blade to handle so you don't need to stoop to far.
Wooo Hooo, there's snow in them thar hills.

I think I figured out a pretty good option for the extended shovel without the epoxy/wax molding process.

I went to the Voile website and orderd the Telepro T6 shovel, but then also ordered a spare Telepro handle (there is a link to "spare parts") for another $23.

Process:
1) Drill out the rivet holding the handle onto the end of the spare and pulled it off.
2) Cut off the necked down end of the larger diameter pipe (the section that inserts into the shovel head),
3) Mark and drill a series of holes, every 2 inches, along that larger diameter piece
4) Assemble the shovel with the "double handle", up to 53" long and stable - and can be collapsed down as far as you need - by taking out the extra two sections and reverting to the original shovel geometry.

All told, this took me about 20 minutes and an extra $23 on top of the base shovel.